Before 3pm on a working day, contacted the same day. After 3pm, the next working day. Contact, not a quotation. Telephone
Start a project brief
A modern distribution warehouse near a working port, pale silver cladding and tall roller shutter doors, a wet concrete yard, tall dockside container cranes on the far right.

Location · Hampshire · South East

Commercial spray foam insulation in Southampton

For Southampton premises serving storage, industry or the port, we assess the building and clarify the access the work would need.

NEARBYTJW Grab Hire, Bournemouth. 505 m² of steel roof insulated from beneath.

Start a project brief Send photographs

Or call . Enquiries before 3pm on a working day are contacted the same day.

  • Over 20 years' experience
  • Thousands of projects
  • Rated 4.8 out of 5 by our customers
  • 25 year workmanship warranty
  • Free, no-obligation survey

Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day.

CoverageCovered from HOLVEM's Weybridge depot, one of four depots (Weybridge, Bedford, Manchester, Exeter) that give HOLVEM nationwide coverage.

01Start with your building

Pick the building, or the surface the foam goes onto.

Port-related storage is one part of Southampton's commercial picture. Nearby projects also show a yard warehouse and an aircraft hangar converted to a film sound stage.

Find your building

All building types
Inside a large distribution warehouse: tall pallet racking under a high profiled steel roof, its underside sprayed in a continuous closed-cell layer.Warehouse and distribution roof insulationCondensation off the racking and the stock, one bay at a time while the floor keeps working. A long industrial unit seen along its length: lattice steel roof trusses and a profiled metal roof sprayed from beneath, strip lights below.Industrial unit and factory insulationApplied from below zone by zone, so production carries on around the work. The interior of a large aircraft hangar, its curved roof structure above an empty floor.Aircraft hangar insulationTall arched and portal-frame roofs at scale, sprayed from lifts and towers. A sports hall interior, a large clear-span roof over the courts.Sports hall and leisure centre insulationLarge clear spans over people, condensation and heat loss controlled from below. A vehicle workshop interior with a car on a ramp under a steel roof.Workshops & garagesMOT bays and workshops: a drier, warmer shed, sprayed around the ramps and benches. All building typesTwenty-one building types: the problem each one has, and how the work is phased around it.Browse

Find your application

All applications
An empty unit floor looking towards an open roller-shutter door: the whole profiled steel roof and its purlins sprayed from beneath, rooflights left clear.Spray foam to a profiled metal roof undersideThe sheet stays as the weather line; the layer closes laps, fixings and purlin flanges from below. A pitched steel truss roof fully sprayed from beneath in a continuous pale closed-cell layer, light battens hanging below.Corrosion of metal roofsFixings and purlins first All applicationsEleven surfaces: what happens to each one, in what order, and how you know it was done properly.Browse

02Recent projects · Nearby

Recent projects in and around Southampton.

The 505 m² Bournemouth warehouse and 4000 m² Alton sound stage show separate constructions and specifications. The warehouse had a condensation concern; the sound stage needed its corrugated roof considered as part of the occupied film space. Read the examples, then Send photographs of your Southampton premises.

Inside the TJW Grab Hire warehouse after the work: the box-profile steel roof and purlins under a continuous cream closed-cell layer, the polycarbonate rooflights left clear, vehicles parked below.Project recordNearby TJW Grab Hire, Bournemouth A sound but uninsulated box-profile steel roof allowed condensation to fall onto vehicles and equipment.
  • About 505 m² of metal roof
  • 50 mm closed-cell, from below
  • Customer reported: no more drips on the lorries
Read the record Inside the hangar sound stage after the work: the whole corrugated roof and its steel trusses under a continuous pale open-cell layer, the stage floor cleared below.Project recordNearby Black Hangar Studios, Alton The 4000 m² aircraft hangar had a corrugated asbestos-cement roof that drummed in wind and rain.
  • 4000 m² of hangar roof
  • 25 mm closed-cell base, 150 to 200 mm open-cell over it
  • Studio reported rain drumming virtually eliminated
Read the record

Recent installs near Southampton

  • NearbyPortsmouthCommercial buildingBox-profile metal roof underside119 m²Closed-cell spray foam with an intumescent coating
  • NearbyFordingbridgeWater parkClosed-cell spray foam beneath 150 m² of corrugated metal soffit sheetsA 25 mm application filled the troughs, with preparation and masking carried out by the client
  • NearbyRopleyIndustrial unitBox-profile roof and wallsClosed-cell spray foam

Have a roof or soffit in Southampton like these?Five photographs from the floor are often enough for a same-day direction. Before 3pm on a working day, we contact you the same day.

Start a project brief

03Why Southampton buildings need it

Port estates with space inside and outside

Southampton’s storage premises combine enclosed working areas with yards and goods handling outside. Roof insulation concerns the conditions inside the building, with access shaped by the surrounding operation. Those external areas are part of the commercial setting. For insulation, show us the enclosed building, its roof and how equipment could reach the treatment area. Read warehouse and distribution roof insulation.

  1. S1

    The Business Magazine reports a combined 113.73 acres at Marchwood and Cracknore Hard Industrial Estates, describing units with large self-contained yards alongside open storage.

    Source: The Business Magazine, Solent lsh acquires industrial estates associated british ports

04How a job runs

Photographs or a survey, a specification, then the application.

The same three stages on every HOLVEM job, in Southampton or anywhere else. You bring the building and what is bothering you about it; we bring the rest, in this order.

STAGE 01Locate the work area

Send views of the roof or soffit and its access, with any landlord or site rules. Use survey or photographs to prepare.

STAGE 02Specify for the objective

Moisture assessment informs the build-up; a calculated U-value is used where a thermal target must be met. The foam type and depth follow the building.

STAGE 03Plan the site sequence

The required preparation, equipment access and application areas are considered together. A nearby project's timescale does not set the programme for your premises.

How a job runs, in full

05Straight answers

The questions Southampton building owners ask first.

Answered the way the specialist answers them on the call. A question we have not covered? Ask it when we speak. No obligation.

Do you cover commercial spray foam work in Southampton?
Southampton enquiries are covered from our Weybridge depot. Include the location of the premises, the building's use and any port or landlord access requirements with the construction details. Start a project brief.
Which nearby projects can I compare?
TJW Grab Hire in Bournemouth shows a 505 m² steel roof treatment with 50 mm of closed-cell foam. Black Hangar Studios in Alton shows 4000 m² with closed-cell and open-cell layers beneath a corrugated roof. Read the Black Hangar Studios specification.
How would work be considered around a Southampton storage operation?
Tell us how goods enter and move through the building, which areas could be isolated and what must remain accessible. Where suitable, underside application can be planned by bay. The warehouse and distribution page develops those working-site questions.
What should a Marchwood or Cracknore Hard occupier check?
Ask the landlord or managing contact who needs to agree the alteration and what rules govern contractor access. The estates' ownership is a reason to raise the question, not evidence that a particular permission is required for your unit. Include the response in Start a project brief.
When will HOLVEM contact me about a Southampton enquiry?
Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day. Site agreement and access notes can accompany Start a project brief.
Where is pricing guidance for Southampton commercial insulation?
The spray foam cost guide explains the rates. For a firm project scope, tell us whether the work includes a coating or a layered insulation specification, together with the construction and access.
Can warranty requirements from a port landlord be considered?
25 year HOLVEM workmanship warranty, plus the manufacturer’s 25 year product warranty issued directly to you. Share any warranty or handover information the landlord requests while the scope is being developed. We can discuss the proposed cover against that specification before you agree the work. Start a project brief.

06Nearby areas

Also covered from the Weybridge depot.

Is your project elsewhere around Southampton? Name the town and include any special entry or site agreement requirements with the building details.

Start a project brief All areas we cover

The next step

Your Southampton building.
Your brief.
A specialist.

If you already know the thickness or U-value you need, we price to it and confirm it is right for the building; if not, we work it out with you. A brief takes about five minutes and photographs are welcome. "Not sure" is a useful starting point.

Start a project brief Send photographs

Or call . Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day. A commitment to contact, not a quotation, a survey or a price.

WarrantyA 25-year HOLVEM workmanship warranty, plus the manufacturer's 25-year product warranty, issued directly to the client by the manufacturer. The scope of each is set out in its written terms.

HOLVEM is an accredited installer for the manufacturer of the spray foam systems we apply.

Start a project brief