Before 3pm on a working day, contacted the same day. After 3pm, the next working day. Contact, not a quotation. Telephone
Start a project brief
A stone mill building beside a grey steel-clad shed, with Pennine hills in the mist.

Location · West Yorkshire · Yorkshire and The Humber

Commercial spray foam insulation in Halifax

For a Halifax trade unit or workshop, we assess the roof above each working area and the conditions it needs to support.

NEARBYBradford: about 443 m² of original profiled roof treated with closed-cell foam above storage and a loading-side bay.

Start a project brief Send photographs

Or call . Enquiries before 3pm on a working day are contacted the same day.

  • Over 20 years' experience
  • Thousands of projects
  • Rated 4.8 out of 5 by our customers
  • 25 year workmanship warranty
  • Free, no-obligation survey

Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day.

CoverageCovered from HOLVEM's Manchester depot, one of four depots (Weybridge, Bedford, Manchester, Exeter) that give HOLVEM nationwide coverage.

01Start with your building

Pick the building, or the surface the foam goes onto.

Halifax Industrial Estate includes trade counter users across 15 units in three terraces. The nearby Bradford installations add stockholding and fabrication spaces, with different treatment boundaries inside each premises.

Find your building

All building types
A retail park unit with a wide profiled roof, seen across its car park early in the morning.Retail unit insulationRoofs and soffits over trading units, phased around opening hours. A long industrial unit seen along its length: lattice steel roof trusses and a profiled metal roof sprayed from beneath, strip lights below.Industrial unit and factory insulationApplied from below zone by zone, so production carries on around the work. Inside a large distribution warehouse: tall pallet racking under a high profiled steel roof, its underside sprayed in a continuous closed-cell layer.Warehouse and distribution roof insulationCondensation off the racking and the stock, one bay at a time while the floor keeps working. A vehicle workshop interior with a car on a ramp under a steel roof.Workshop and garage insulationMOT bays and workshops: a drier, warmer shed, sprayed around the ramps and benches. Inside a large arched steel agricultural building: the roof and walls sprayed in a continuous cream closed-cell layer.Agricultural buildingsBarns, livestock and machinery sheds: the roof stays on, the drips stop, the stock stays. All building typesTwenty-one building types: the problem each one has, and how the work is phased around it.Browse

Find your application

All applications
An empty unit floor looking towards an open roller-shutter door: the whole profiled steel roof and its purlins sprayed from beneath, rooflights left clear.Spray foam to a profiled metal roof undersideThe sheet stays as the weather line; the layer closes laps, fixings and purlin flanges from below. A concrete deck soffit in an undercroft fully sprayed in a continuous cream closed-cell layer, galvanised steel frame and cable ducts below.Concrete soffitsBonded to the slab, continuous around beams and penetrations, to a calculated depth. All applicationsEleven surfaces: what happens to each one, in what order, and how you know it was done properly.Browse

02Recent projects · Nearby

Recent projects in and around Halifax.

The Bradford installations distinguish a main store and loading-side bay from a localised workshop bench area. The Rochdale project concerns soffit panels and beam bottoms, illustrating another defined application scope. Mark the part of your Halifax unit concerned when you Send photographs.

Recent installs near Halifax

  • NearbyBradfordGeneral trade stockholding unitOriginal profiled roof above the main store and loading-side bayAbout 443 m² of closed-cell spray foam
  • NearbyBradfordCompact fabrication and repair workshopA localised roof section above the enclosed bench areaAbout 158 m² of closed-cell spray foam
  • NearbyRochdaleIndustrial unitSoffit infill panels, beam bottoms and ceiling372 m²Closed-cell spray foam

Have a roof or soffit in Halifax like these?Five photographs from the floor are often enough for a same-day direction. Before 3pm on a working day, we contact you the same day.

Start a project brief

03Why Halifax buildings need it

Steel-roofed trade units and larger mixed estates

Halifax’s trade and workshop premises combine customer areas, stored goods and practical work beneath their roofs. A specification needs to distinguish those activities and the parts of the building serving them. For your own unit, explain whether the roof sits above customer-facing space, stock or a workshop. That use belongs alongside the construction details in the enquiry. Read retail unit insulation.

  1. S1

    The Halifax Industrial Estate agent listing on Sharplaunch describes steel portal frames, brick and steel-sheet elevations, and pitched steel roofs.

    Source: Halifax Industrial Estate agent listing (Sharplaunch), published source (halifaxindustrialestatehalifax.sharplaunch.com)
  2. S2

    Place Yorkshire describes Caldene Business Centre at Mytholmroyd as about 81,000 sq ft across 20 units.

    Source: Place Yorkshire, Howdens commits to caldene business centre

04How a job runs

Photographs or a survey, a specification, then the application.

The same three stages on every HOLVEM job, in Halifax or anywhere else. You bring the building and what is bothering you about it; we bring the rest, in this order.

STAGE 01Show the unit in use

Include the roof, supports and treatment boundary, with the stock, bench areas or loading bay beneath it identified.

STAGE 02Review the requirements

The specification follows the construction and moisture assessment, with fire requirements considered against the activities you describe.

STAGE 03Agree access and preparation

Establish how the selected area can be made available for application, including the route for equipment and the adjacent operations.

How a job runs, in full

05Straight answers

The questions Halifax building owners ask first.

Answered the way the specialist answers them on the call. A question we have not covered? Ask it when we speak. No obligation.

Do you assess commercial spray foam projects in Halifax?
Yes. Our Manchester depot covers Halifax enquiries. Show us the unit's construction and explain whether the proposed treatment sits above trade counter space, storage or workshop activity. Start a project brief.
What nearby work is relevant to a Halifax trade unit?
The Bradford stockholding example treated about 443 m² of original profiled roof above a main store and loading-side bay. A separate Bradford workshop had about 158 m² treated above an enclosed bench area. Explore workshop and garage insulation for that building use.
Can the enquiry cover only one working area in my Halifax unit?
Identify the boundary and explain how that area connects to the rest of the operation. The Bradford bench-area project is a localised roof treatment, so it is useful to show similarly specific boundaries in Send photographs.
What matters before insulating a Halifax steel roof?
Establish the actual sheet condition, moisture concern and activity beneath it. If hot work takes place in the premises, flag its location for a separate fire review. Read about spray foam to a profiled metal roof underside.
When will you contact me about a Halifax building?
Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day. Label the storage, loading and workshop areas when you Send photographs.
How do I start a cost enquiry for a Halifax unit?
Read the commercial spray foam pricing guide, then define the roof or other surface you want quoted. Include the proposed boundary and any fire requirement already established for the unit.
Can you explain warranty information for a localised treatment?
25 year HOLVEM workmanship warranty, plus the manufacturer’s 25 year product warranty issued directly to you. Ask for the cover to be explained against the selected roof section and agreed work. Supply any documentation required by the landlord or occupier through Start a project brief.

06Nearby areas

Also covered from the Manchester depot.

Does the enquiry concern a unit outside Halifax? Name its town and the activities beneath the proposed treatment, especially if it differs from the Halifax operation.

Start a project brief All areas we cover

The next step

Your Halifax building.
Your brief.
A specialist.

If you already know the thickness or U-value you need, we price to it and confirm it is right for the building; if not, we work it out with you. A brief takes about five minutes and photographs are welcome. "Not sure" is a useful starting point.

Start a project brief Send photographs

Or call . Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day. A commitment to contact, not a quotation, a survey or a price.

WarrantyA 25-year HOLVEM workmanship warranty, plus the manufacturer's 25-year product warranty, issued directly to the client by the manufacturer. The scope of each is set out in its written terms.

HOLVEM is an accredited installer for the manufacturer of the spray foam systems we apply.

Start a project brief