Before 3pm on a working day, contacted the same day. After 3pm, the next working day. Contact, not a quotation. Telephone
Start a project brief
A new pale industrial unit with a single loading door, a tall Victorian cotton mill with a square chimney.

Location · Greater Manchester · North West

Commercial spray foam insulation in Oldham

An insulation scope for Oldham premises that respects the existing fabric and working use.

NEARBYRochdale soffit and ceiling application, 372 m² of closed-cell foam.

Start a project brief Send photographs

Or call 01932 506658. Enquiries before 3pm on a working day are contacted the same day.

  • Over 20 years' experience
  • Thousands of projects
  • Rated 4.8 out of 5 by our customers
  • 25 year workmanship warranty
  • Free, no-obligation survey

Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day.

CoverageCovered from HOLVEM's Manchester depot, one of four depots (Weybridge, Bedford, Manchester, Exeter) that give HOLVEM England and Wales coverage.

01Start with your building

Pick the building, or the surface the foam goes onto.

Oldham commercial premises need an assessment suited to their retained construction. An occupied older building and a modern warehouse can present different access and alteration requirements.

Find your building

All building types
Inside a large distribution warehouse: tall pallet racking under a high profiled steel roof, its underside sprayed in a continuous closed-cell layer.Warehouse and distribution roof insulationCondensation off the racking and the stock, one bay at a time while the floor keeps working. A long industrial unit seen along its length: lattice steel roof trusses and a profiled metal roof sprayed from beneath, strip lights below.Industrial unit and factory insulationApplied from below zone by zone, so production carries on around the work. A corrugated steel Nissen hut in a farmyard, its arch catching the morning light.Nissen hut insulationCurved corrugated steel sealed from inside, the whole arch in one layer. A vehicle workshop interior with a car on a ramp under a steel roof.Workshops & garagesMOT bays and workshops: a drier, warmer shed, sprayed around the ramps and benches. A retail park unit with a wide profiled roof, seen across its car park early in the morning.Retail unitsRoofs and soffits over trading units, phased around opening hours. All building typesTwenty-one building types: the problem each one has, and how the work is phased around it.Browse

Find your application

All applications
An empty unit floor looking towards an open roller-shutter door: the whole profiled steel roof and its purlins sprayed from beneath, rooflights left clear.Spray foam to a profiled metal roof undersideThe sheet stays as the weather line; the layer closes laps, fixings and purlin flanges from below. A concrete deck soffit in an undercroft fully sprayed in a continuous cream closed-cell layer, galvanised steel frame and cable ducts below.Concrete soffitsBonded to the slab, continuous around beams and penetrations, to a calculated depth. All applicationsEleven surfaces: what happens to each one, in what order, and how you know it was done properly.Browse

02Recent projects · Nearby

Recent projects in and around Oldham.

Start a project brief or Send photographs.

Recent installs near Oldham

  • NearbyRochdaleClosed-cell foam at 190 mm treated soffit infill panelsWith a final 50 mm pass to beam bottoms and ceiling, covering 372 m²
  • NearbyWarringtonA curved Nissen hut roof and internal walls received 25 mm of closed-cell foam across 493 m²; the lower external walls were sealed and silicone-coated
  • NearbyContractor’s store and workshop, BlackburnClosed-cell foam

Have a roof or soffit in Oldham like these?Five photographs from the floor are often enough for a same-day direction. Before 3pm on a working day, we contact you the same day.

Start a project brief

03Why Oldham buildings need it

Older commercial fabric and new industrial space in Oldham

Oldham business premises need roof improvements to work with the construction already in place. Retained features and the activity inside an occupied building should be considered together when planning insulation. Read industrial unit and factory insulation.

  1. S1

    Indurent describes Hollinwood Junction as new industrial and warehouse units ranging from 4,838 to 42,350 sq ft. TheBusinessDesk reported approval for more than 192,000 sq ft of distribution and manufacturing space within the scheme.

    Source: Indurent, Hollinwood junction
  2. S2

    Oldham Council’s Mill Strategy assessed 64 mills from the cotton-industry period. It states that most of the mill stock lies within designated employment areas and remains in good condition and active use.

    Source: The Business Desk, published source (thebusinessdesk.com)

04How a job runs

Photographs or a survey, a specification, then the application.

The same three stages on every HOLVEM job, in Oldham or anywhere else. You bring the building and what is bothering you about it; we bring the rest, in this order.

STAGE 01Describe the occupied building and any known restrictions on the roof or internal surfaces

STAGE 02We review condition and access alongside retained features, services and the intended commercial use

STAGE 03The written scope defines preparation and treatment boundaries within the alteration requirements confirmed for the property

How a job runs, in full

05Straight answers

The questions Oldham building owners ask first.

Answered the way the specialist answers them on the call. A question we have not covered? Ask it when we speak. No obligation.

Do you carry out commercial spray foam insulation in Oldham?
Yes. HOLVEM’s Manchester depot serves Oldham. Add known building restrictions to Start a project brief.
What work have you completed in or near Oldham?
Nearby work includes a 372 m² soffit and ceiling application in Rochdale, about 213 m² of contractor’s store-and-workshop roof in Blackburn, and a Warrington curved-envelope treatment.
Are former mills all assessed under the same restrictions?
No. The individual property’s construction, condition and permission requirements need to be established. A former industrial use does not itself determine the restrictions that apply.
Can retained features limit the treatment area?
Yes. Visibility, access and maintenance needs can define exclusions. Those features should be identified before the proposed application boundary is agreed.
How quickly will HOLVEM respond to an enquiry from Oldham?
Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day. Identify retained features and known alteration restrictions when you Send photographs for Oldham.
How is commercial insulation in Oldham priced?
The commercial insulation cost guide explains the factors behind a quotation. Oldham work needs an assessed area, preparation and access plan suited to the existing fabric.
What warranty comes with work in Oldham?
25 year HOLVEM workmanship warranty, plus the manufacturer’s 25 year product warranty issued directly to you. The Oldham handover documents identify the completed scope and the warranty cover supplied for the agreed application.

06Nearby areas

Also covered from the Manchester depot.

Do you assess occupied premises around Oldham? Yes. We consider commercial buildings around Oldham with their retained fabric, use and alteration requirements in mind.

Start a project brief All areas we cover

The next step

Your Oldham building.
Your brief.
A specialist.

If you already know the thickness or U-value you need, we price to it and confirm it is right for the building; if not, we work it out with you. A brief takes about five minutes and photographs are welcome. "Not sure" is a useful starting point.

Start a project brief Send photographs

Or call 01932 506658. Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day. A commitment to contact, not a quotation, a survey or a price.

WarrantyA 25-year HOLVEM workmanship warranty, plus the manufacturer's 25-year product warranty, issued directly to the client by the manufacturer. The scope of each is set out in its written terms.

HOLVEM is an accredited installer for the manufacturer of the spray foam systems we apply.

Start a project brief 01932 506658