Before 3pm on a working day, contacted the same day. After 3pm, the next working day. Contact, not a quotation. Telephone
Start a project brief
A Victorian sandstone warehouse with arched windows beside modern steel-clad units, hillside terraces beyond.

Location · West Yorkshire · Yorkshire and The Humber

Commercial spray foam insulation in Bradford

A focused insulation scope for Bradford stockholding, workshop and warehouse premises.

LOCALBradford trade stockholding unit, about 443 m² of closed-cell insulation.

Start a project brief Send photographs

Or call 01932 506658. Enquiries before 3pm on a working day are contacted the same day.

  • Over 20 years' experience
  • Thousands of projects
  • Rated 4.8 out of 5 by our customers
  • 25 year workmanship warranty
  • Free, no-obligation survey

Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day.

CoverageCovered from HOLVEM's Manchester depot, one of four depots (Weybridge, Bedford, Manchester, Exeter) that give HOLVEM England and Wales coverage.

01Start with your building

Pick the building, or the surface the foam goes onto.

Bradford stockholding premises need a scope that fits loading, storage and their roof. Workshop treatments require particular care around bench areas and specialist work zones.

Find your building

All building types
Inside a large distribution warehouse: tall pallet racking under a high profiled steel roof, its underside sprayed in a continuous closed-cell layer.Warehouse and distribution roof insulationCondensation off the racking and the stock, one bay at a time while the floor keeps working. A long industrial unit seen along its length: lattice steel roof trusses and a profiled metal roof sprayed from beneath, strip lights below.Industrial unit and factory insulationApplied from below zone by zone, so production carries on around the work. A vehicle workshop interior with a car on a ramp under a steel roof.Workshop and garage insulationMOT bays and workshops: a drier, warmer shed, sprayed around the ramps and benches. A sports hall interior, a large clear-span roof over the courts.Sports hall and leisure centre insulationLarge clear spans over people, condensation and heat loss controlled from below. A retail park unit with a wide profiled roof, seen across its car park early in the morning.Retail unitsRoofs and soffits over trading units, phased around opening hours. All building typesTwenty-one building types: the problem each one has, and how the work is phased around it.Browse

Find your application

All applications
An empty unit floor looking towards an open roller-shutter door: the whole profiled steel roof and its purlins sprayed from beneath, rooflights left clear.Spray foam to a profiled metal roof undersideThe sheet stays as the weather line; the layer closes laps, fixings and purlin flanges from below. A concrete deck soffit in an undercroft fully sprayed in a continuous cream closed-cell layer, galvanised steel frame and cable ducts below.Concrete soffitsBonded to the slab, continuous around beams and penetrations, to a calculated depth. All applicationsEleven surfaces: what happens to each one, in what order, and how you know it was done properly.Browse

02Recent projects · Local

Recent projects in and around Bradford.

Start a project brief or Send photographs.

Recent installs near Bradford

  • LocalBradfordA wholesale storage and picking warehouse received closed-cell foam to the principal roof slopes over storage aislesAbout 856 m², with clearance for building services
  • LocalTrade stockholding unit, BradfordClosed-cell foam
  • LocalFabrication and repair workshop, BradfordClosed-cell foam

Have a roof or soffit in Bradford like these?Five photographs from the floor are often enough for a same-day direction. Before 3pm on a working day, we contact you the same day.

Start a project brief

03Why Bradford buildings need it

Industrial stock and warehouse roofs in Bradford

Bradford commercial premises need to accommodate stored goods and practical access to the roof. Workshop benches, loading areas and retained services can each shape a suitable treatment boundary. Read industrial unit and factory insulation.

  1. S1

    City of Bradford Metropolitan District Council’s local plan identifies employment allocations at Staithgate Lane, including areas of 5.82 and 2.87 hectares. It also identifies employment sites at Bowling totalling 11.55 hectares.

    Source: City of Bradford Metropolitan District Council, Bradford se
  2. S2

    TheBusinessDesk reported a 193,576 sq ft warehouse at Euroway Trading Estate.

    Source: TheBusinessDesk, published source (thebusinessdesk.com)
  3. S3

    Mileway describes another Euroway unit as a 15,810 sq ft steel portal frame warehouse with a pitched roof incorporating 10% translucent panels.

    Source: Mileway, Euroway trading estate

04How a job runs

Photographs or a survey, a specification, then the application.

The same three stages on every HOLVEM job, in Bradford or anywhere else. You bring the building and what is bothering you about it; we bring the rest, in this order.

STAGE 01Show the roof layout, rooflights and the occupied areas beneath the proposed application

STAGE 02We assess the retained surfaces and access, including service clearance and any specialist work zones

STAGE 03The agreed scope separates treated roof sections from exclusions and states the preparation required

How a job runs, in full

05Straight answers

The questions Bradford building owners ask first.

Answered the way the specialist answers them on the call. A question we have not covered? Ask it when we speak. No obligation.

Do you carry out commercial spray foam insulation in Bradford?
Yes. HOLVEM’s Manchester depot covers Bradford. Identify rooflights and workshop zones when you Start a project brief.
What work have you completed in or near Bradford?
Bradford work includes closed-cell insulation over a trade store and loading-side bay, about 443 m², a workshop bench area, about 158 m², and wholesale storage aisles, about 856 m².
How are rooflights handled in a roof insulation plan?
They should be identified as part of the survey and treatment plan. Their condition, intended function and maintenance access need to be considered before the surrounding application is specified.
Can a fabrication workshop have a targeted application?
Yes. Our Bradford workshop scope treated a localised roof section over an enclosed bench area. Hot-work activity needs a separate fire review rather than being included by assumption.
How quickly will HOLVEM respond to an enquiry from Bradford?
Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day. Identify rooflights and any hot-work areas when you Send photographs for Bradford.
How is commercial insulation in Bradford priced?
Refer to the commercial insulation cost guide. A Bradford roof quote follows its defined treatment area, preparation needs, access and exclusions around retained features.
What warranty comes with work in Bradford?
25 year HOLVEM workmanship warranty, plus the manufacturer’s 25 year product warranty issued directly to you. The Bradford handover records the specified application and the warranty documents supplied for the completed treatment.

06Nearby areas

Also covered from the Manchester depot.

Do you cover industrial premises around Bradford? Yes. We assess commercial enquiries around Bradford with particular attention to retained roofs, services and the use of the working space.

Start a project brief All areas we cover

The next step

Your Bradford building.
Your brief.
A specialist.

If you already know the thickness or U-value you need, we price to it and confirm it is right for the building; if not, we work it out with you. A brief takes about five minutes and photographs are welcome. "Not sure" is a useful starting point.

Start a project brief Send photographs

Or call 01932 506658. Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day. A commitment to contact, not a quotation, a survey or a price.

WarrantyA 25-year HOLVEM workmanship warranty, plus the manufacturer's 25-year product warranty, issued directly to the client by the manufacturer. The scope of each is set out in its written terms.

HOLVEM is an accredited installer for the manufacturer of the spray foam systems we apply.

Start a project brief 01932 506658