Before 3pm on a working day, contacted the same day. After 3pm, the next working day. Contact, not a quotation. Telephone
Start a project brief
A vehicle workshop with a two-post lift, a workbench and an open roller shutter, under a pale lined steel roof.

Location · West Yorkshire · Yorkshire and The Humber

Commercial spray foam insulation in Leeds

A Leeds storage hall and a vehicle workshop ask different questions. We assess the construction, moisture and use before specifying.

LOCALLeeds: about 274 m² of workshop roof and an adjoining section treated with closed-cell foam.

Start a project brief Send photographs

Or call . Enquiries before 3pm on a working day are contacted the same day.

  • Over 20 years' experience
  • Thousands of projects
  • Rated 4.8 out of 5 by our customers
  • 25 year workmanship warranty
  • Free, no-obligation survey

Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day.

CoverageCovered from HOLVEM's Manchester depot, one of four depots (Weybridge, Bedford, Manchester, Exeter) that give HOLVEM nationwide coverage.

01Start with your building

Pick the building, or the surface the foam goes onto.

Our Leeds workshop example concerns a commercial vehicle repair unit. The wider local context includes industrial and logistics development, where the areas beneath the roof can serve quite different activities.

Find your building

All building types
A vehicle workshop interior with a car on a ramp under a steel roof.Workshop and garage insulationMOT bays and workshops: a drier, warmer shed, sprayed around the ramps and benches. Inside a large distribution warehouse: tall pallet racking under a high profiled steel roof, its underside sprayed in a continuous closed-cell layer.Warehouse and distribution roof insulationCondensation off the racking and the stock, one bay at a time while the floor keeps working. A long industrial unit seen along its length: lattice steel roof trusses and a profiled metal roof sprayed from beneath, strip lights below.Industrial unit and factory insulationApplied from below zone by zone, so production carries on around the work. A sports hall interior, a large clear-span roof over the courts.Sports hall and leisure centre insulationLarge clear spans over people, condensation and heat loss controlled from below. A retail park unit with a wide profiled roof, seen across its car park early in the morning.Retail unitsRoofs and soffits over trading units, phased around opening hours. All building typesTwenty-one building types: the problem each one has, and how the work is phased around it.Browse

Find your application

All applications
An empty unit floor looking towards an open roller-shutter door: the whole profiled steel roof and its purlins sprayed from beneath, rooflights left clear.Spray foam to a profiled metal roof undersideThe sheet stays as the weather line; the layer closes laps, fixings and purlin flanges from below. A concrete deck soffit in an undercroft fully sprayed in a continuous cream closed-cell layer, galvanised steel frame and cable ducts below.Concrete soffitsBonded to the slab, continuous around beams and penetrations, to a calculated depth. All applicationsEleven surfaces: what happens to each one, in what order, and how you know it was done properly.Browse

02Recent projects · Local

Recent projects in and around Leeds.

The Leeds installation defines the treated workshop area. The nearby Ripon case concerns a water tank, providing another use of closed-cell foam without implying the same moisture conditions in both. Start a project brief with the area and purpose of your own enquiry.

Recent installs near Leeds

  • LocalLeedsTrade supplies and distribution warehouseUnderside of the main racked-storage hall roof with rooflights and plant access kept clearAbout 1194 m² of closed-cell spray foam
  • LocalLeedsCommercial vehicle repair workshopRoof and a limited section beside the roller shutter openingAbout 274 m² of closed-cell spray foam
  • NearbyCarltonIndustrial unitClosed-cell spray foam with an intumescent coating

Have a roof or soffit in Leeds like these?Five photographs from the floor are often enough for a same-day direction. Before 3pm on a working day, we contact you the same day.

Start a project brief

03Why Leeds buildings need it

Industrial and logistics space in the Aire Valley

Leeds’ warehouses and repair premises divide their space between storage, dispatch and workshop activity. The roof area included in an upgrade needs to reflect those uses and the openings and services around them. Read warehouse and distribution roof insulation.

  1. S1

    Leeds City Council describes its Enterprise Zone as 142 hectares across four development sites, placing it within Aire Valley Leeds, an area with more than 400 businesses.

    Source: Leeds City Council, published source (leeds.gov.uk)
  2. S2

    Published planning coverage for Temple Green describes around 950,000 sq ft of proposed industrial space. For an occupied building, describe the working areas beneath the roof and the change you need. A storage hall, repair bay or smaller adjoining space needs its scope made clear.

    Source: Logistics Manager, Sq ft leeds logistics hub moves ahead

04How a job runs

Photographs or a survey, a specification, then the application.

The same three stages on every HOLVEM job, in Leeds or anywhere else. You bring the building and what is bothering you about it; we bring the rest, in this order.

STAGE 01Show the treatment area

Include the roof, adjoining surfaces and any openings or services that define the scope. Add the use of each area in the photographs or enquiry.

STAGE 02Check the proposed build-up

Moisture assessment and any required whole-construction U-value calculation inform the specification. The aim is to connect depth to the objective.

STAGE 03Prepare the agreed surfaces

Application and any coating follow the specified scope, with equipment access and nearby activities considered for the site.

How a job runs, in full

05Straight answers

The questions Leeds building owners ask first.

Answered the way the specialist answers them on the call. A question we have not covered? Ask it when we speak. No obligation.

Do you assess commercial insulation projects in Leeds?
Leeds work is covered from our Manchester depot. Describe the roof or other surface and what happens in the area concerned, whether that is storage, vehicle repair or another commercial use. Start a project brief.
What local work is shown for Leeds?
The local workshop scope is about 274 m², including the roof and a limited section beside the roller shutter opening, treated with closed-cell foam. The nearby Ripon case concerns condensation on a water tank. Compare the different surfaces in all applications.
Can work be planned around a Leeds workshop or warehouse?
Identify the bays and routes that could be made available, and explain which activities need to continue beside the proposed work. The sequence needs considering against the actual scope, including equipment access. See how a job runs.
Why describe separate uses within the same Leeds building?
A storage area and a repair space can have different operating requirements. Describe each included area so the moisture assessment and proposed insulation address the conditions you actually have. Use Start a project brief to set out that scope.
How quickly will HOLVEM contact me about Leeds premises?
Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day. Explain the use of each work area when you Send photographs.
How is pricing established for a Leeds commercial project?
Start with the commercial spray foam pricing guide. Then define the surfaces and work areas included, plus any thermal or coating requirement, so the building can be assessed for its own quotation.
Can warranty cover be discussed for a defined treatment area?
25 year HOLVEM workmanship warranty, plus the manufacturer’s 25 year product warranty issued directly to you. Set out the area you intend to commission and any warranty information the owner or project team needs. We can discuss the cover alongside that scope before the work is agreed. Add the requirements to Start a project brief.

06Nearby areas

Also covered from the Manchester depot.

Considering another site beyond Leeds? Separate its town and use from the Leeds enquiry, particularly where the activities or surfaces differ.

Start a project brief All areas we cover

The next step

Your Leeds building.
Your brief.
A specialist.

If you already know the thickness or U-value you need, we price to it and confirm it is right for the building; if not, we work it out with you. A brief takes about five minutes and photographs are welcome. "Not sure" is a useful starting point.

Start a project brief Send photographs

Or call . Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day. A commitment to contact, not a quotation, a survey or a price.

WarrantyA 25-year HOLVEM workmanship warranty, plus the manufacturer's 25-year product warranty, issued directly to the client by the manufacturer. The scope of each is set out in its written terms.

HOLVEM is an accredited installer for the manufacturer of the spray foam systems we apply.

Start a project brief