Before 3pm on a working day, contacted the same day. After 3pm, the next working day. Contact, not a quotation. Telephone
Start a project brief
A leisure centre with a curved metal roof over a pool hall and a long glazed side wall.

Location · Shropshire · West Midlands

Commercial spray foam insulation in Telford

A defined insulation approach for Telford industrial premises and buildings with demanding internal conditions.

LOCALTelford: a completed closed-cell pool hall roof and structural members project.

Start a project brief Send photographs

Or call . Enquiries before 3pm on a working day are contacted the same day.

  • Over 20 years' experience
  • Thousands of projects
  • Rated 4.8 out of 5 by our customers
  • 25 year workmanship warranty
  • Free, no-obligation survey

Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day.

CoverageCovered from HOLVEM's Manchester depot, one of four depots (Weybridge, Bedford, Manchester, Exeter) that give HOLVEM nationwide coverage.

01Start with your building

Pick the building, or the surface the foam goes onto.

A Telford storage unit and a humid pool hall put different demands on their envelopes. The building use needs to lead the assessment before a shared insulation material is considered.

Find your building

All building types
A long industrial unit seen along its length: lattice steel roof trusses and a profiled metal roof sprayed from beneath, strip lights below.Industrial unit and factory insulationApplied from below zone by zone, so production carries on around the work. Inside a large distribution warehouse: tall pallet racking under a high profiled steel roof, its underside sprayed in a continuous closed-cell layer.Warehouse and distribution roof insulationCondensation off the racking and the stock, one bay at a time while the floor keeps working. The interior of a cold store, pale insulated panels and a chilled loading area.Cold store insulationA continuous vapour seal where the temperature difference is largest and every gap sweats. An indoor swimming pool hall, the roof structure above the still water.Swimming pool hall insulationThe wettest air in any building, kept off a cold roof by a continuous air and vapour seal. A vehicle workshop interior with a car on a ramp under a steel roof.Workshops & garagesMOT bays and workshops: a drier, warmer shed, sprayed around the ramps and benches. All building typesTwenty-one building types: the problem each one has, and how the work is phased around it.Browse

Find your application

All applications
An empty unit floor looking towards an open roller-shutter door: the whole profiled steel roof and its purlins sprayed from beneath, rooflights left clear.Spray foam to a profiled metal roof undersideThe sheet stays as the weather line; the layer closes laps, fixings and purlin flanges from below. A concrete deck soffit in an undercroft fully sprayed in a continuous cream closed-cell layer, galvanised steel frame and cable ducts below.Concrete soffitsBonded to the slab, continuous around beams and penetrations, to a calculated depth. All applicationsEleven surfaces: what happens to each one, in what order, and how you know it was done properly.Browse

02Recent projects · Nearby

Recent projects in and around Telford.

Start a project brief or Send photographs.

Recent installs near Telford

  • NearbyShrewsburyAn industrial estate workshop unit received 50 mm of closed-cell foam to its box profile roof undersideCovering 316 m²
  • NearbyBrierley HillAn industrial unit's fibre-cement roof underside received 75 mm of closed-cell foam with a protective coating over 292 m²; skylights were primed
  • NearbyWalsallClosed-cell foam at 25 mm covered a box profile roofSupporting steel and gable ends serving self-storage bays, over 1678 m²
  • RegionalMidlands distribution warehouseCorrugated metal roof, treated from the underside75 mm closed-cell in 1 layer

Have a roof or soffit in Telford like these?Five photographs from the floor are often enough for a same-day direction. Before 3pm on a working day, we contact you the same day.

Start a project brief

03Why Telford buildings need it

Industrial development and distinct operating conditions

Telford commercial buildings need their roof construction assessed alongside the conditions created inside them. A dry storage space and a humid public facility require different moisture assumptions. Read industrial unit and factory insulation.

  1. S1

    Logistics Matters describes a Hortonwood 40 warehouse of about 123,835 sq ft on 6.72 acres for an operator already using premises at Halesfield and Stafford Park.

    Source: Logistics Matters, published source (logisticsmatters.co.uk)
  2. S2

    Shropshire Star reported an application for development on a 9.5-acre Hortonwood 40 site, including industrial, warehouse and distribution space. Telford & Wrekin Council has publicised business energy assessments and limited energy-efficiency funding. Current availability and eligibility need to be checked with the administrator before an application or project programme relies on support.

    Source: Shropshire Star, New warehouses planned for telford business site

04How a job runs

Photographs or a survey, a specification, then the application.

The same three stages on every HOLVEM job, in Telford or anywhere else. You bring the building and what is bothering you about it; we bring the rest, in this order.

STAGE 01Explain the building use

Show the roof and describe storage, production or humidity conditions, including any proposal to change the use.

STAGE 02Assess moisture before depth

We review the substrate and condensation risk to establish the appropriate insulation build-up for that enclosure.

STAGE 03Prepare the working scope

Agree treated areas, exclusions and site access, with documentation for an energy application only where required.

How a job runs, in full

05Straight answers

The questions Telford building owners ask first.

Answered the way the specialist answers them on the call. A question we have not covered? Ask it when we speak. No obligation.

Do you carry out commercial spray foam insulation in Telford?
Yes. Telford enquiries are covered from our Manchester depot. Explain whether the premises are used for storage, industrial work or a humid public activity so the assessment starts with its own operating conditions. Start a project brief.
What work have you completed in or near Telford?
Our team installed closed-cell insulation to a Telford public pool hall roof and its members. The Midlands warehouse record is regional, while nearby Shrewsbury work covers 316 m² of a workshop roof underside.
Can insulation be planned around a working Telford premises?
The work needs a defined area and agreed access around occupation. Identify stock, production or public use that must be protected, together with the windows when the proposed Telford treatment area can be isolated.
Can I assume local energy funding will cover the work?
No. Confirm whether support is currently available and whether your proposal meets the administrator's requirements. The building assessment and written scope should be established independently of any unconfirmed funding assumption.
How quickly will HOLVEM respond to an enquiry from Telford?
Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day. State the internal use and any application deadline in your Telford enquiry. Start a project brief.
How is commercial insulation in Telford priced?
Consult the commercial spray foam cost guide. A humidity-led pool hall specification differs from a storage roof treatment, so a Telford quotation needs the actual conditions, surface and access scope.
What warranty comes with work in Telford?
25 year HOLVEM workmanship warranty, plus the manufacturer’s 25 year product warranty issued directly to you. Ask us to explain the cover with the proposed Telford build-up and its intended operating conditions, particularly where moisture requirements shape the specification.

06Nearby areas

Also covered from the Manchester depot.

A commercial project beyond Telford? HOLVEM's depot network supports surrounding industrial and public premises through nationwide coverage.

Start a project brief All areas we cover

The next step

Your Telford building.
Your brief.
A specialist.

If you already know the thickness or U-value you need, we price to it and confirm it is right for the building; if not, we work it out with you. A brief takes about five minutes and photographs are welcome. "Not sure" is a useful starting point.

Start a project brief Send photographs

Or call . Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day. A commitment to contact, not a quotation, a survey or a price.

WarrantyA 25-year HOLVEM workmanship warranty, plus the manufacturer's 25-year product warranty, issued directly to the client by the manufacturer. The scope of each is set out in its written terms.

HOLVEM is an accredited installer for the manufacturer of the spray foam systems we apply.

Start a project brief