Before 3pm on a working day, contacted the same day. After 3pm, the next working day. Contact, not a quotation. Telephone
Start a project brief
A terrace of small light-industrial units on a tidy trading estate, each with a grey roller shutter and a pale clad upper panel, a concrete apron and low kerbs in front. A castle on a sandstone rock stands in the middle distance.

Location · Nottinghamshire · East Midlands

Commercial spray foam insulation in Nottingham

Bringing a Nottingham commercial building back into use? We assess its existing construction before specifying insulation for the next use.

NEARBYDerby: about 491 m² of workshop roof and a short return treated with closed-cell foam.

Start a project brief Send photographs

Or call . Enquiries before 3pm on a working day are contacted the same day.

  • Over 20 years' experience
  • Thousands of projects
  • Rated 4.8 out of 5 by our customers
  • 25 year workmanship warranty
  • Free, no-obligation survey

Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day.

CoverageCovered from HOLVEM's Manchester depot, one of four depots (Weybridge, Bedford, Manchester, Exeter) that give HOLVEM nationwide coverage.

01Start with your building

Pick the building, or the surface the foam goes onto.

Beeston Business Park combines office and industrial space. Our nearby Derby installation concerns a working repair workshop, where the treatment includes a return above an enclosed tooling area.

Find your building

All building types
A long industrial unit seen along its length: lattice steel roof trusses and a profiled metal roof sprayed from beneath, strip lights below.Industrial unit and factory insulationApplied from below zone by zone, so production carries on around the work. A modern UK office building with an open undercroft car park beneath it, the concrete soffit visible.Office and concrete soffit insulationThe cold floor over an open undercroft, fixed from the car park with the offices open. Inside a large distribution warehouse: tall pallet racking under a high profiled steel roof, its underside sprayed in a continuous closed-cell layer.Warehouse and distribution roof insulationCondensation off the racking and the stock, one bay at a time while the floor keeps working. A vehicle workshop interior with a car on a ramp under a steel roof.Workshop and garage insulationMOT bays and workshops: a drier, warmer shed, sprayed around the ramps and benches. A retail park unit with a wide profiled roof, seen across its car park early in the morning.Retail unitsRoofs and soffits over trading units, phased around opening hours. All building typesTwenty-one building types: the problem each one has, and how the work is phased around it.Browse

Find your application

All applications
An empty unit floor looking towards an open roller-shutter door: the whole profiled steel roof and its purlins sprayed from beneath, rooflights left clear.Spray foam to a profiled metal roof undersideThe sheet stays as the weather line; the layer closes laps, fixings and purlin flanges from below. A concrete deck soffit in an undercroft fully sprayed in a continuous cream closed-cell layer, galvanised steel frame and cable ducts below.Concrete soffit spray foam insulationBonded to the slab, continuous around beams and penetrations, to a calculated depth. All applicationsEleven surfaces: what happens to each one, in what order, and how you know it was done properly.Browse

02Recent projects · Nearby

Recent projects in and around Nottingham.

Derby defines a workshop roof and short return above tooling. Barrow-upon-Soar adds a curing chamber, and Worksop adds roof undersides across four buildings. The Midlands distribution project offers a separate regional comparison. Show the comparable part of your Nottingham premises when you Send photographs.

Recent installs near Nottingham

  • NearbyDerbyGeneral engineering and repair workshopRoof and one short return above the enclosed tooling areaAbout 491 m² of closed-cell spray foam
  • NearbyBarrow-upon-SoarConcrete-products curing chamber within industrial premisesInsulated with closed-cell spray foam
  • NearbyWorksopCommercial premisesRoof undersides across four buildings693 m²Closed-cell spray foam
  • RegionalMidlands distribution warehouseCorrugated metal roof, treated from the underside75 mm closed-cell in 1 layer

Have a roof or soffit in Nottingham like these?Five photographs from the floor are often enough for a same-day direction. Before 3pm on a working day, we contact you the same day.

Start a project brief

03Why Nottingham buildings need it

Refurbishment within a mixed business park

Nottingham’s commercial refurbishments bring existing building fabric into a new or continuing use. The insulation work needs a clear relationship to the retained construction and the space being prepared for occupation. For a Nottinghamshire commercial refurbishment, explain the intended occupation alongside the present building fabric. The insulation enquiry should identify what will stay, what will change and which surfaces are included. Read industrial unit and factory insulation.

  1. S1

    Bridges Fund Management’s Beeston Business Park acquisition report describes about 412,000 sq ft of office and industrial space across 48 acres. It also identifies potential to refurbish existing buildings.

    Source: Bridges Fund Management, Bridges chancerygate buy beeston business park from vbri for

04How a job runs

Photographs or a survey, a specification, then the application.

The same three stages on every HOLVEM job, in Nottingham or anywhere else. You bring the building and what is bothering you about it; we bring the rest, in this order.

STAGE 01Record the surfaces

Show the roof or soffit and any short returns that belong to the proposed treatment. Add the intended use and any condition reports available.

STAGE 02Establish the specification

Assess moisture and construction alongside the objective. Where a thermal target applies, the U-value calculation concerns the complete build-up.

STAGE 03Plan the application

Agree preparation, access and the areas available for work before treatment proceeds within the defined scope.

How a job runs, in full

05Straight answers

The questions Nottingham building owners ask first.

Answered the way the specialist answers them on the call. A question we have not covered? Ask it when we speak. No obligation.

Do you carry out commercial spray foam insulation in Nottingham?
Nottingham enquiries are covered from our Manchester depot. Tell us whether the building is occupied, being refurbished or returning to use, and identify the roof or other surface concerned. Start a project brief.
What work have you completed near Nottingham?
The regional Midlands distribution project specifies a continuous 75 mm closed-cell roof treatment. Nearby, the Derby workshop project covers about 491 m² of roof and a short return above its tooling area. Read the Midlands distribution warehouse project.
Can a Nottingham project be arranged around continuing production?
Roof underside application can be planned zone by zone. At Nuneaton Signs, weekend work left production untouched. Explain the production areas and times available at your own site so its sequence can be considered. See how a job runs.
What should I provide for a building being brought back into use?
Provide its intended use, existing construction and any available condition findings. The Beeston refurbishment context is a reason to ask those questions; the treatment still depends on the individual building. Add the relevant information to Start a project brief.
How quickly will you contact me about a Nottingham enquiry?
Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day. Add the planned occupation and available condition information when you Send photographs.
Where can I find cost guidance for a Nottingham refurbishment?
Use the commercial spray foam cost guide for published guidance. A quotation needs the proposed surfaces, construction and access, together with any thermal target set for the refurbishment.
How can I review warranty cover before agreeing the work?
25 year HOLVEM workmanship warranty, plus the manufacturer’s 25 year product warranty issued directly to you. Ask for the warranty information alongside the proposed specification and treatment area. If the refurbishment has particular owner or procurement requirements, include them in Start a project brief so they can be discussed before agreement.

06Nearby areas

Also covered from the Manchester depot.

Assessing a second premises outside Nottingham? Tell us its town, planned use and present condition so that building has a scope of its own.

Start a project brief All areas we cover

The next step

Your Nottingham building.
Your brief.
A specialist.

If you already know the thickness or U-value you need, we price to it and confirm it is right for the building; if not, we work it out with you. A brief takes about five minutes and photographs are welcome. "Not sure" is a useful starting point.

Start a project brief Send photographs

Or call . Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day. A commitment to contact, not a quotation, a survey or a price.

WarrantyA 25-year HOLVEM workmanship warranty, plus the manufacturer's 25-year product warranty, issued directly to the client by the manufacturer. The scope of each is set out in its written terms.

HOLVEM is an accredited installer for the manufacturer of the spray foam systems we apply.

Start a project brief