Before 3pm on a working day, contacted the same day. After 3pm, the next working day. Contact, not a quotation. Telephone
Start a project brief
A large port-side warehouse on a quay, pale silver-grey cladding, tall doors, the still grey water of the dock along the left edge. A high suspension bridge spanning a wooded gorge stands in the far distance.

Location · Bristol · South West

Commercial spray foam insulation in Bristol

From a cold distribution unit to a roof you want to retain, we help you establish what your Bristol building needs.

LOCALBristol: 204 m² of adjoining roofs treated as one external system.

Start a project brief Send photographs

Or call . Enquiries before 3pm on a working day are contacted the same day.

  • Over 20 years' experience
  • Thousands of projects
  • Rated 4.8 out of 5 by our customers
  • 25 year workmanship warranty
  • Free, no-obligation survey

Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day.

CoverageCovered from HOLVEM's Exeter depot, one of four depots (Weybridge, Bedford, Manchester, Exeter) that give HOLVEM nationwide coverage.

01Start with your building

Pick the building, or the surface the foam goes onto.

A distribution centre needs its stock and working routes considered. A cold store brings a different moisture question.

Find your building

All building types
Inside a large distribution warehouse: tall pallet racking under a high profiled steel roof, its underside sprayed in a continuous closed-cell layer.Warehouse and distribution roof insulationCondensation off the racking and the stock, one bay at a time while the floor keeps working. A long industrial unit seen along its length: lattice steel roof trusses and a profiled metal roof sprayed from beneath, strip lights below.Industrial unit and factory insulationApplied from below zone by zone, so production carries on around the work. The interior of a cold store, pale insulated panels and a chilled loading area.Cold store insulationA continuous vapour seal where the temperature difference is largest and every gap sweats. A shipping container converted to a workspace, its steel walls seen from the open doors.Shipping container insulationSteel that sweats on every cold morning, sealed from inside into a dry, usable space. A vehicle workshop interior with a car on a ramp under a steel roof.Workshops & garagesMOT bays and workshops: a drier, warmer shed, sprayed around the ramps and benches. All building typesTwenty-one building types: the problem each one has, and how the work is phased around it.Browse

Find your application

All applications
An empty unit floor looking towards an open roller-shutter door: the whole profiled steel roof and its purlins sprayed from beneath, rooflights left clear.Spray foam to a profiled metal roof undersideThe sheet stays as the weather line; the layer closes laps, fixings and purlin flanges from below. A pitched steel truss roof fully sprayed from beneath in a continuous pale closed-cell layer, light battens hanging below.Corrosion of metal roofsFixings and purlins first All applicationsEleven surfaces: what happens to each one, in what order, and how you know it was done properly.Browse

02Recent projects · Nearby

Recent projects in and around Bristol.

A local project shows an external roof system in Bristol. Alveston adds six container interiors and Weston-super-Mare shows an open-cell dividing-wall treatment. Each starts with a different construction. Identify the surface and the space it serves when you Send photographs.

Recent installs near Bristol

  • NearbyAlvestonSix shipping containersCorrugated roofs, walls and doorsClosed-cell spray foam at 25 mm across 387 m² to mitigate condensation and solar gain
  • NearbyWeston-super-MareIndustrial unitDividing wall between two units110 m²Open-cell spray foam
  • LocalAdjoining roofs, Bristol

Have a roof or soffit in Bristol like these?Five photographs from the floor are often enough for a same-day direction. Before 3pm on a working day, we contact you the same day.

Start a project brief

03Why Bristol buildings need it

Buildings serving the port and the city

Bristol’s commercial premises bring goods storage, distribution and workshop activity under different kinds of roof. Insulation needs to suit the enclosed working space and the construction that protects it. Those uses describe the local setting. Your building still needs its own assessment: what it stores or produces, where water appears and how warmth escapes. Read warehouse and distribution roof insulation.

  1. S1

    South Gloucestershire Council identifies Avonmouth and Severnside’s Enterprise Area as including distribution, energy, waste and industry.

    Source: South Gloucestershire Council, Locate in sg
  2. S2

    Bristol Port Company also identifies over 1000 acres of development land in its immediate vicinity.

    Source: Bristol Port Company / Carter Jonas, published source (bristolport.co.uk)

04How a job runs

Photographs or a survey, a specification, then the application.

The same three stages on every HOLVEM job, in Bristol or anywhere else. You bring the building and what is bothering you about it; we bring the rest, in this order.

STAGE 01Show the area involved

Send photographs of the underside or external surface, with a note about the problem and the activities around it. The survey or photographs guide helps you prepare.

STAGE 02Establish the right method

We assess the construction and check moisture before selecting insulation. Where you need a thermal target, the calculation concerns the whole build-up.

STAGE 03Plan the application

Underside insulation and external roof systems need different access arrangements. Agree the scope and working areas around the method specified.

How a job runs, in full

05Straight answers

The questions Bristol building owners ask first.

Answered the way the specialist answers them on the call. A question we have not covered? Ask it when we speak. No obligation.

Do you carry out commercial spray foam insulation in Bristol?
Yes. Bristol enquiries are covered from our Exeter depot. Describe whether you want underside insulation, a wall assessed or advice on retaining a roof, so we can begin with the right scope. Start a project brief.
What work can I see in or near Bristol?
Our local Bristol project is an external treatment of 204 m² across two adjoining roofs. The nearby Weston-super-Mare project concerns 110 m² of dividing wall insulated with open-cell foam. Explore all applications to compare the methods.
Can the work be planned around a Bristol distribution operation?
Application from beneath can be considered one bay at a time. Tell us which routes, loading areas and stock positions need to remain available, then discuss what can be isolated for the work. The warehouse and distribution page explains the approach.
What should an Avonmouth or Severnside occupier include in the enquiry?
Explain your own shift pattern and how the area beneath the roof is used. A distribution setting does not establish the working hours or restrictions of an individual unit. Include the site manager's access requirements when you Start a project brief.
When will HOLVEM contact me about my Bristol enquiry?
Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day. Include the location and the area concerned through Start a project brief.
Where can I find commercial insulation costs for Bristol?
Use the commercial spray foam cost guide for pricing guidance. The local external roof system and a roof underside are different scopes of work, so describe the method or concern you want assessed before asking for a quotation.
Can I discuss warranty cover before commissioning the work?
25 year HOLVEM workmanship warranty, plus the manufacturer’s 25 year product warranty issued directly to you. Yes. Ask us to explain the cover for the proposed work alongside its specification. An external roof system needs to be discussed on its own terms, including the full scope you intend to commission. Start a project brief.

06Nearby areas

Also covered from the Exeter depot.

A project beyond Bristol? Give us the town and the kind of premises involved, together with the surface you want to discuss.

Start a project brief All areas we cover

The next step

Your Bristol building.
Your brief.
A specialist.

If you already know the thickness or U-value you need, we price to it and confirm it is right for the building; if not, we work it out with you. A brief takes about five minutes and photographs are welcome. "Not sure" is a useful starting point.

Start a project brief Send photographs

Or call . Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day. A commitment to contact, not a quotation, a survey or a price.

WarrantyA 25-year HOLVEM workmanship warranty, plus the manufacturer's 25-year product warranty, issued directly to the client by the manufacturer. The scope of each is set out in its written terms.

HOLVEM is an accredited installer for the manufacturer of the spray foam systems we apply.

Start a project brief