Before 3pm on a working day, contacted the same day. After 3pm, the next working day. Contact, not a quotation. Telephone
Start a project brief
The interior of a cold store, pale insulated panels and a chilled loading area.

Location · West Midlands · West Midlands

Commercial spray foam insulation in Birmingham

The heat and moisture inside a Birmingham factory depend on what happens there. We assess that use alongside the building.

NEARBYNuneaton Signs. 2924 m² encapsulated from beneath at weekends, with production untouched.

Start a project brief Send photographs

Or call . Enquiries before 3pm on a working day are contacted the same day.

  • Over 20 years' experience
  • Thousands of projects
  • Rated 4.8 out of 5 by our customers
  • 25 year workmanship warranty
  • Free, no-obligation survey

Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day.

CoverageCovered from HOLVEM's Bedford depot, one of four depots (Weybridge, Bedford, Manchester, Exeter) that give HOLVEM nationwide coverage.

01Start with your building

Pick the building, or the surface the foam goes onto.

Birmingham's manufacturing and food sectors bring different thermal demands. Our nearby work includes self-storage bays in Walsall and an operating factory at Nuneaton Signs.

Find your building

All building types
A long industrial unit seen along its length: lattice steel roof trusses and a profiled metal roof sprayed from beneath, strip lights below.Industrial unit and factory insulationApplied from below zone by zone, so production carries on around the work. Inside a large distribution warehouse: tall pallet racking under a high profiled steel roof, its underside sprayed in a continuous closed-cell layer.Warehouse and distribution roof insulationCondensation off the racking and the stock, one bay at a time while the floor keeps working. The interior of a cold store, pale insulated panels and a chilled loading area.Cold store insulationA continuous vapour seal where the temperature difference is largest and every gap sweats. A vehicle workshop interior with a car on a ramp under a steel roof.Workshop and garage insulationMOT bays and workshops: a drier, warmer shed, sprayed around the ramps and benches. A retail park unit with a wide profiled roof, seen across its car park early in the morning.Retail unitsRoofs and soffits over trading units, phased around opening hours. All building typesTwenty-one building types: the problem each one has, and how the work is phased around it.Browse

Find your application

All applications
An empty unit floor looking towards an open roller-shutter door: the whole profiled steel roof and its purlins sprayed from beneath, rooflights left clear.Spray foam to a profiled metal roof undersideThe sheet stays as the weather line; the layer closes laps, fixings and purlin flanges from below. A corrugated fibre-cement industrial roof seen from below, pale grey sheets on steel purlins.Fibre-cement and asbestos-cement roof encapsulationThe sheet stays, encapsulated from below after a condition survey. All applicationsEleven surfaces: what happens to each one, in what order, and how you know it was done properly.Browse

02Recent projects · Nearby

Recent projects in and around Birmingham.

Nuneaton Signs shows a documented weekend sequence. The Walsall and Brierley Hill installs show other roof scopes, including a coating over closed-cell foam. Look at the relevant example, then describe your own process or working area in Start a project brief.

Recent installs near Birmingham

  • NearbyWalsallWarehouseBox-profile roof, supporting steel and gable ends of self-storage bays1678 m²Closed-cell spray foam
  • NearbyBrierley HillIndustrial unitFibre-cement roof underside292 m²Closed-cell spray foam with an intumescent coating
  • NearbyCoventryCommercial buildingClosed-cell spray foam with an intumescent coating
  • NearbyNuneaton Signs, Nuneaton2924 m² of factory roof encapsulated25 mm closed-cell, sealed from beneath

Have a roof or soffit in Birmingham like these?Five photographs from the floor are often enough for a same-day direction. Before 3pm on a working day, we contact you the same day.

Start a project brief

03Why Birmingham buildings need it

A building enquiry shaped by its use

Birmingham’s commercial buildings support production, storage and uses that depend on controlled internal conditions. A roof specification needs to connect those requirements to the construction over the working space. Tell us what your building produces, stores or houses, and where its performance is causing difficulty. Those details help connect the insulation enquiry to the work the premises support. Read industrial unit and factory insulation.

  1. S1

    Birmingham City Council identifies economic zones including Aston's Advanced Manufacturing Hub, Tyseley's Environmental Enterprise District and Witton's Food Hub.

    Source: Birmingham City Council, published source (birmingham.gov.uk)
  2. S2

    Property Magazine International describes Tyseley Business Park as five units totalling 350,558 sq ft.

    Source: Property Magazine International, Cording sells birmingham industrial estate for million

04How a job runs

Photographs or a survey, a specification, then the application.

The same three stages on every HOLVEM job, in Birmingham or anywhere else. You bring the building and what is bothering you about it; we bring the rest, in this order.

STAGE 01Explain the operation

Photographs locate the surface; your description explains what happens around it. Include access periods and any specified temperature or thermal objective.

STAGE 02Assess the building

Moisture checks inform the recommendation, with a whole-build-up U-value calculation where a target must be met. Foam and any coating follow the requirements of the construction.

STAGE 03Set the application sequence

Roof underside work can be considered by zone where the premises allow. The weekend arrangement at Nuneaton belongs to that project.

How a job runs, in full

05Straight answers

The questions Birmingham building owners ask first.

Answered the way the specialist answers them on the call. A question we have not covered? Ask it when we speak. No obligation.

Do you provide commercial spray foam insulation in Birmingham?
Birmingham projects are covered from our Bedford depot. Explain the building and the process it supports, including any temperature or moisture concern you want assessed. That information belongs in your project brief.
Which nearby projects are relevant to Birmingham buyers?
Nuneaton Signs provides the 2924 m² factory encapsulation project. The Walsall installation concerns 1678 m² of roof, steel and gable ends at self-storage bays; Brierley Hill concerns a coated fibre-cement underside. Read the Nuneaton Signs project.
Could insulation work be arranged around production?
Nuneaton Signs was treated at weekends with production untouched. Your factory needs its own access and sequence considered, including the areas available and any process that must remain active. Set out those requirements in Start a project brief.
Do Birmingham's manufacturing zones determine the insulation specification?
No. They describe the local commercial setting. The recommendation needs the construction, moisture assessment and requirements of the individual process or occupied space. See the commercial spray foam insulation service for that building-first approach.
When will HOLVEM contact me about Birmingham premises?
Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day. Describe the process and any thermal target in Start a project brief.
How do I find costs for a Birmingham industrial project?
Begin with the commercial spray foam cost guide. If the proposed work needs a coating or a particular thermal target, include that requirement with the surface and area so the quotation concerns the full specification.
Can you discuss warranty requirements with our project team?
25 year HOLVEM workmanship warranty, plus the manufacturer’s 25 year product warranty issued directly to you. Include the information your facilities manager, designer or property owner requires before the scope is settled. The proposed installation and its warranty cover can then be discussed together. Start a project brief.

06Nearby areas

Also covered from the Bedford depot.

Is another site part of the Birmingham enquiry? List its town separately and explain the operation there, so each building can be considered on its own scope.

Start a project brief All areas we cover

The next step

Your Birmingham building.
Your brief.
A specialist.

If you already know the thickness or U-value you need, we price to it and confirm it is right for the building; if not, we work it out with you. A brief takes about five minutes and photographs are welcome. "Not sure" is a useful starting point.

Start a project brief Send photographs

Or call . Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day. A commitment to contact, not a quotation, a survey or a price.

WarrantyA 25-year HOLVEM workmanship warranty, plus the manufacturer's 25-year product warranty, issued directly to the client by the manufacturer. The scope of each is set out in its written terms.

HOLVEM is an accredited installer for the manufacturer of the spray foam systems we apply.

Start a project brief