Before 3pm on a working day, contacted the same day. After 3pm, the next working day. Contact, not a quotation. Telephone
Start a project brief
A very large clean white advanced manufacturing plant with a long glazed office frontage, a broad landscaped verge, slender wind turbines.

Location · Tyne and Wear · North East

Commercial spray foam insulation in Sunderland

A considered insulation approach for Sunderland's retained industrial shells and working premises.

NEARBYDurham: a completed closed-cell insulation project to steel sheet piling infill.

Start a project brief Send photographs

Or call . Enquiries before 3pm on a working day are contacted the same day.

  • Over 20 years' experience
  • Thousands of projects
  • Rated 4.8 out of 5 by our customers
  • 25 year workmanship warranty
  • Free, no-obligation survey

Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day.

CoverageCovered from HOLVEM's Manchester depot, one of four depots (Weybridge, Bedford, Manchester, Exeter) that give HOLVEM nationwide coverage.

01Start with your building

Pick the building, or the surface the foam goes onto.

A Sunderland industrial enquiry may involve an original roof or a later addition to the unit. Each section needs its construction and working use identified before the insulation is chosen.

Find your building

All building types
A long industrial unit seen along its length: lattice steel roof trusses and a profiled metal roof sprayed from beneath, strip lights below.Industrial unit and factory insulationApplied from below zone by zone, so production carries on around the work. A vehicle workshop interior with a car on a ramp under a steel roof.Workshop and garage insulationMOT bays and workshops: a drier, warmer shed, sprayed around the ramps and benches. Inside a large distribution warehouse: tall pallet racking under a high profiled steel roof, its underside sprayed in a continuous closed-cell layer.Warehouse and distribution roof insulationCondensation off the racking and the stock, one bay at a time while the floor keeps working. A hospital services building with plant on its roof, seen from the estate road.Hospital and public building insulationOccupied, phased and documented: the specification and the QA pack a public estate needs. A retail park unit with a wide profiled roof, seen across its car park early in the morning.Retail unitsRoofs and soffits over trading units, phased around opening hours. All building typesTwenty-one building types: the problem each one has, and how the work is phased around it.Browse

Find your application

All applications
An empty unit floor looking towards an open roller-shutter door: the whole profiled steel roof and its purlins sprayed from beneath, rooflights left clear.Spray foam to a profiled metal roof undersideThe sheet stays as the weather line; the layer closes laps, fixings and purlin flanges from below. A concrete deck soffit in an undercroft fully sprayed in a continuous cream closed-cell layer, galvanised steel frame and cable ducts below.Concrete soffitsBonded to the slab, continuous around beams and penetrations, to a calculated depth. All applicationsEleven surfaces: what happens to each one, in what order, and how you know it was done properly.Browse

02Recent projects · Nearby

Recent projects in and around Sunderland.

Start a project brief or Send photographs.

Recent installs near Sunderland

  • NearbyHartlepoolMechanical and repair workshopRoof over the enclosed repair bay and a side returnAbout 252 m² of closed-cell spray foam
  • NearbyStockton-on-TeesMetalwork and general repair unitRoof sections over the bench work areasAbout 392 m² of closed-cell spray foam
  • NearbyExtension project, DurhamClosed-cell foam

Have a roof or soffit in Sunderland like these?Five photographs from the floor are often enough for a same-day direction. Before 3pm on a working day, we contact you the same day.

Start a project brief

03Why Sunderland buildings need it

Established estates alongside planned manufacturing space

Sunderland industrial premises can bring together retained structures and later changes in use. An insulation enquiry needs to distinguish the original building from the areas altered since it was built. Sunderland City Council's 2016 Employment Land Review identifies buildings dating from the 1950s at North Hylton and Southwick Industrial Estates, with later infill. The age of that stock is useful background; roof material and condition still need to be established individually. Read industrial unit and factory insulation.

  1. S1

    South Tyneside Council describes the International Advanced Manufacturing Park on the Sunderland border as about 150 hectares, with 1.8 million sq ft planned for phase two.

    Source: South Tyneside Council, International advanced manufacturing park iamp
  2. S2

    Invest North East England also describes the development as extending over more than 150 hectares.

    Source: Invest North East England, published source (investnortheastengland.co.uk)

04How a job runs

Photographs or a survey, a specification, then the application.

The same three stages on every HOLVEM job, in Sunderland or anywhere else. You bring the building and what is bothering you about it; we bring the rest, in this order.

STAGE 01Show changes in construction

Photograph the original unit and later infill or extensions, noting known roof materials and repairs.

STAGE 02Review moisture and condition

We assess the relevant build-up and condensation risk before choosing treatment for the surfaces concerned.

STAGE 03Define application access

Agree the areas available beneath the roof and record repairs or other interventions outside the insulation scope.

How a job runs, in full

05Straight answers

The questions Sunderland building owners ask first.

Answered the way the specialist answers them on the call. A question we have not covered? Ask it when we speak. No obligation.

Do you carry out commercial spray foam insulation in Sunderland?
Yes. Sunderland is covered from our Manchester depot. Include the unit's construction and later alterations so the enquiry begins with its actual fabric rather than a general description of the estate. Start a project brief.
What work have you completed in or near Sunderland?
The nearby Durham extension involved closed-cell insulation to steel sheet piling infill. Our Hartlepool warehouse work provides a roof example of about 677 m² over dry goods and equipment storage.
Can work be considered around a working Sunderland industrial unit?
The work areas and isolation arrangements need to be agreed around the operator's processes. Tell us about machinery, deliveries and the parts of the Sunderland unit that must remain accessible before scheduling is discussed.
Does an older Sunderland estate imply an asbestos roof?
No. A building's age alone does not identify its roof material. Supply existing survey information and clear photographs; any suspected asbestos needs the appropriate assessment before a method is selected.
How quickly will HOLVEM respond to an enquiry from Sunderland?
Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day. Add known roof materials and alterations to your Sunderland enquiry. Start a project brief.
How is commercial insulation in Sunderland priced?
Read the commercial spray foam cost guide. Different materials within a Sunderland unit can require different preparation, so the quotation needs the treated surfaces and exclusions established first.
What warranty comes with work in Sunderland?
25 year HOLVEM workmanship warranty, plus the manufacturer’s 25 year product warranty issued directly to you. Discuss the cover against each specified part of the Sunderland building, particularly where original fabric and later additions have different build-ups.

06Nearby areas

Also covered from the Manchester depot.

A site beyond Sunderland? HOLVEM's nationwide depot coverage also supports commercial enquiries from the surrounding industrial areas.

Start a project brief All areas we cover

The next step

Your Sunderland building.
Your brief.
A specialist.

If you already know the thickness or U-value you need, we price to it and confirm it is right for the building; if not, we work it out with you. A brief takes about five minutes and photographs are welcome. "Not sure" is a useful starting point.

Start a project brief Send photographs

Or call . Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day. A commitment to contact, not a quotation, a survey or a price.

WarrantyA 25-year HOLVEM workmanship warranty, plus the manufacturer's 25-year product warranty, issued directly to the client by the manufacturer. The scope of each is set out in its written terms.

HOLVEM is an accredited installer for the manufacturer of the spray foam systems we apply.

Start a project brief