Before 3pm on a working day, contacted the same day. After 3pm, the next working day. Contact, not a quotation. Telephone
Start a project brief
A large modern manufacturing building with a long low glazed band and pale cladding, a broad car park, honey-coloured stone spires.

Location · Oxfordshire · South East

Commercial spray foam insulation in Oxford

Insulation assessed around Oxford commercial roofs, working spaces and the access they require.

NEARBYThame: completed closed-cell treatment to a rugby club container ceiling and walls.

Start a project brief Send photographs

Or call 01932 506658. Enquiries before 3pm on a working day are contacted the same day.

  • Over 20 years' experience
  • Thousands of projects
  • Rated 4.8 out of 5 by our customers
  • 25 year workmanship warranty
  • Free, no-obligation survey

Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day.

CoverageCovered from HOLVEM's Bedford depot, one of four depots (Weybridge, Bedford, Manchester, Exeter) that give HOLVEM England and Wales coverage.

01Start with your building

Pick the building, or the surface the foam goes onto.

An Oxford manufacturing premises needs its work and dispatch areas considered alongside the roof. A workshop or research building needs its own conditions and access established before treatment is chosen.

Find your building

All building types
A long industrial unit seen along its length: lattice steel roof trusses and a profiled metal roof sprayed from beneath, strip lights below.Industrial unit and factory insulationApplied from below zone by zone, so production carries on around the work. A vehicle workshop interior with a car on a ramp under a steel roof.Workshop and garage insulationMOT bays and workshops: a drier, warmer shed, sprayed around the ramps and benches. A school hall exterior with a wide flat roof and rooflights on a quiet morning.School building insulationTreated out of term, the roof and soffits sealed from below. A shipping container converted to a workspace, its steel walls seen from the open doors.Shipping container insulationSteel that sweats on every cold morning, sealed from inside into a dry, usable space. Inside a large arched steel agricultural building: the roof and walls sprayed in a continuous cream closed-cell layer.Agricultural building roof insulationBarns, livestock and machinery sheds: the roof stays on, the drips stop, the stock stays. All building typesTwenty-one building types: the problem each one has, and how the work is phased around it.Browse

Find your application

All applications
A concrete deck soffit in an undercroft fully sprayed in a continuous cream closed-cell layer, galvanised steel frame and cable ducts below.Concrete soffit spray foam insulationBonded to the slab, continuous around beams and penetrations, to a calculated depth. An empty unit floor looking towards an open roller-shutter door: the whole profiled steel roof and its purlins sprayed from beneath, rooflights left clear.Profiled metal roof undersideThe sheet stays as the weather line; the layer closes laps, fixings and purlin flanges from below. All applicationsEleven surfaces: what happens to each one, in what order, and how you know it was done properly.Browse

02Recent projects · Nearby

Recent projects in and around Oxford.

Start a project brief or Send photographs.

Recent installs near Oxford

  • NearbyThameClosed-cell spray foam at 50 mm was applied to the ceiling and walls of a rugby club shipping container
  • NearbyThameAn agricultural building roof received closed-cell spray foam insulation across 304 m²
  • NearbyGreat MissendenA commercial unit based on a farm received 50 mm of closed-cell foam to its fibre-cement roof undersideCovering 96 m²

Have a roof or soffit in Oxford like these?Five photographs from the floor are often enough for a same-day direction. Before 3pm on a working day, we contact you the same day.

Start a project brief

03Why Oxford buildings need it

Manufacturing and research premises with distinct requirements

Oxford commercial buildings need their activities understood before a roof insulation scope is fixed. The access available over manufacturing, storage or research space depends on the operation in that building. These are different commercial settings. For an individual premises, establish working access, internal conditions and the surfaces involved rather than assuming a shared programme or insulation build-up. Read industrial unit and factory insulation.

  1. S1

    Oxford City Council describes Mini Plant Oxford as a 69.9-hectare employment site with large industrial buildings and vehicle storage and dispatch areas.

    Source: Oxford City Council, Mini plant oxford site capacity assessment
  2. S2

    The University of Oxford describes Begbroke Science Park as accommodating around 30 companies and more than 20 research groups.

    Source: University of Oxford (Begbroke Science Park), published source (begbroke.ox.ac.uk)

04How a job runs

Photographs or a survey, a specification, then the application.

The same three stages on every HOLVEM job, in Oxford or anywhere else. You bring the building and what is bothering you about it; we bring the rest, in this order.

STAGE 01Show the surface and its use

Photograph the roof or enclosure with the working area beneath, including goods routes and equipment.

STAGE 02Establish the conditions

Assess construction and moisture before selecting insulation for the agreed building use.

STAGE 03Agree access with the operator

Set out protection, isolation and the available work windows for application.

How a job runs, in full

05Straight answers

The questions Oxford building owners ask first.

Answered the way the specialist answers them on the call. A question we have not covered? Ask it when we speak. No obligation.

Do you carry out commercial spray foam insulation in Oxford?
Yes. Our Bedford depot covers Oxford commercial insulation enquiries. Identify the roof or enclosure and explain the operation beneath it so the assessment can address construction and access together. Start a project brief.
What work have you completed in or near Oxford?
Nearby Thame work includes container ceilings and walls and a 304 m² agricultural roof. Great Missenden provides a 96 m² fibre-cement roof underside example, all treated with closed-cell foam.
Can work be assessed around an Oxford commercial operation?
The operator needs to identify available work zones and how people, equipment and goods will be protected. Provide those details so the Oxford scope can be assessed around actual working requirements.
What should a manufacturing premises describe at enquiry stage?
Include production areas, dispatch routes and the proposed treatment surface. Oxford City Council's description of a major manufacturing site is context; your own layout and working windows determine the practical access plan.
How quickly will HOLVEM respond to an enquiry from Oxford?
Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day. Add working activities and dispatch routes when you Start a project brief for Oxford.
How is commercial insulation in Oxford priced?
Read the commercial spray foam cost guide. Enclosure geometry, substrate preparation and operational access need to be established before the Oxford treatment can be quoted.
What warranty comes with work in Oxford?
25 year HOLVEM workmanship warranty, plus the manufacturer’s 25 year product warranty issued directly to you. Discuss the cover against the Oxford construction and surfaces specified, with operational or specialist areas excluded from the work made clear.

06Nearby areas

Also covered from the Bedford depot.

A commercial premises beyond Oxford? Our depot arrangements support surrounding workshops, industrial units and storage buildings.

Start a project brief All areas we cover

The next step

Your Oxford building.
Your brief.
A specialist.

If you already know the thickness or U-value you need, we price to it and confirm it is right for the building; if not, we work it out with you. A brief takes about five minutes and photographs are welcome. "Not sure" is a useful starting point.

Start a project brief Send photographs

Or call 01932 506658. Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day. A commitment to contact, not a quotation, a survey or a price.

WarrantyA 25-year HOLVEM workmanship warranty, plus the manufacturer's 25-year product warranty, issued directly to the client by the manufacturer. The scope of each is set out in its written terms.

HOLVEM is an accredited installer for the manufacturer of the spray foam systems we apply.

Start a project brief 01932 506658