Before 3pm on a working day, contacted the same day. After 3pm, the next working day. Contact, not a quotation. Telephone
Start a project brief
A low research pavilion with timber louvres and a glazed front beside a reed-fringed lake.

Location · Cambridgeshire · East of England

Commercial spray foam insulation in Cambridge

A building-led insulation scope for Cambridge commercial premises, with sensitive activities and access understood early.

NEARBYRoyston: completed closed-cell workshop insulation with a fire-protective coating.

Start a project brief Send photographs

Or call 01932 506658. Enquiries before 3pm on a working day are contacted the same day.

  • Over 20 years' experience
  • Thousands of projects
  • Rated 4.8 out of 5 by our customers
  • 25 year workmanship warranty
  • Free, no-obligation survey

Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day.

CoverageCovered from HOLVEM's Bedford depot, one of four depots (Weybridge, Bedford, Manchester, Exeter) that give HOLVEM England and Wales coverage.

01Start with your building

Pick the building, or the surface the foam goes onto.

A Cambridge laboratory or research premises needs its operating constraints considered before work is programmed. A workshop enclosure needs its own equipment and surface conditions assessed separately.

Find your building

All building types
A modern UK office building with an open undercroft car park beneath it, the concrete soffit visible.Office and concrete soffit insulationThe cold floor over an open undercroft, fixed from the car park with the offices open. A school hall exterior with a wide flat roof and rooflights on a quiet morning.School building insulationTreated out of term, the roof and soffits sealed from below. A long industrial unit seen along its length: lattice steel roof trusses and a profiled metal roof sprayed from beneath, strip lights below.Industrial unit and factory insulationApplied from below zone by zone, so production carries on around the work. A vehicle workshop interior with a car on a ramp under a steel roof.Workshop and garage insulationMOT bays and workshops: a drier, warmer shed, sprayed around the ramps and benches. A shipping container converted to a workspace, its steel walls seen from the open doors.Shipping container insulationSteel that sweats on every cold morning, sealed from inside into a dry, usable space. All building typesTwenty-one building types: the problem each one has, and how the work is phased around it.Browse

Find your application

All applications
A concrete deck soffit in an undercroft fully sprayed in a continuous cream closed-cell layer, galvanised steel frame and cable ducts below.Concrete soffit spray foam insulationBonded to the slab, continuous around beams and penetrations, to a calculated depth. An empty unit floor looking towards an open roller-shutter door: the whole profiled steel roof and its purlins sprayed from beneath, rooflights left clear.Spray foam to a profiled metal roof undersideThe sheet stays as the weather line; the layer closes laps, fixings and purlin flanges from below. All applicationsEleven surfaces: what happens to each one, in what order, and how you know it was done properly.Browse

02Recent projects · Nearby

Recent projects in and around Cambridge.

Start a project brief or Send photographs.

Recent installs near Cambridge

  • NearbyRoystonAn engineering company workshop received closed-cell spray foam with a fire-protective coating
  • NearbyLetchworth Garden CityBusiness shipping container interiors received 25 mm of closed-cell spray foam
  • NearbyLetchworth Garden CityA separate container job received 75 mm of closed-cell foam to ceilingsWalls and underfloor surfaces

Have a roof or soffit in Cambridge like these?Five photographs from the floor are often enough for a same-day direction. Before 3pm on a working day, we contact you the same day.

Start a project brief

03Why Cambridge buildings need it

Research space with its own operating constraints

Cambridge commercial insulation work needs the conditions inside the premises established before the treatment is chosen. Sensitive activities can affect both the available access and how the proposed area is isolated. Laboratory space requires the operator's own working requirements to be understood. The park's floor-space figures do not establish the protection or work windows needed in an individual building. Read office and concrete soffit insulation.

  1. S1

    South Cambridgeshire District Council describes Cambridge Science Park as a 152-acre site with around 1.5 million sq ft of floor space.

    Source: South Cambridgeshire District Council, Science park
  2. S2

    The UK Science Park Association records more than 300,000 sq ft of chemistry laboratories and 100,000 sq ft of biology laboratories there.

    Source: UKSPA, published source (ukspa.org.uk)

04How a job runs

Photographs or a survey, a specification, then the application.

The same three stages on every HOLVEM job, in Cambridge or anywhere else. You bring the building and what is bothering you about it; we bring the rest, in this order.

STAGE 01Show the proposed area

Supply roof or soffit photographs and explain the activities and equipment around it.

STAGE 02Assess the enclosure

Review construction, temperatures and moisture before selecting insulation and recording preparation needs.

STAGE 03Agree a controlled work area

Coordinate protection, isolation and permitted access with the premises operator.

How a job runs, in full

05Straight answers

The questions Cambridge building owners ask first.

Answered the way the specialist answers them on the call. A question we have not covered? Ask it when we speak. No obligation.

Do you carry out commercial spray foam insulation in Cambridge?
Yes. Cambridge commercial premises are covered from our Bedford depot. Describe the surface and sensitive activities so the assessment can consider the building and operating constraints from the outset. Start a project brief.
What work have you completed in or near Cambridge?
Nearby Royston work concerns an engineering workshop treated with closed-cell foam and a fire-protective coating. Letchworth Garden City provides container interior examples involving ceiling, wall and underfloor surfaces.
Can insulation be assessed around Cambridge research activities?
The operator needs to define how the proposed work area can be isolated and what equipment or activity requires protection. Those requirements must be resolved before an application programme is agreed for a Cambridge premises.
What should a laboratory operator include?
Include contamination controls, equipment sensitivity, permit rules and available work windows. The extent of laboratory space at Cambridge Science Park does not determine the requirements of your individual room or enclosure.
How quickly will HOLVEM respond to an enquiry from Cambridge?
Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day. Provide sensitive-use and isolation requirements with your Cambridge outline. Start a project brief.
How is commercial insulation in Cambridge priced?
Use the commercial spray foam cost guide. Surface preparation, any coating and controlled access need to be defined before a Cambridge scope can be quoted.
What warranty comes with work in Cambridge?
25 year HOLVEM workmanship warranty, plus the manufacturer’s 25 year product warranty issued directly to you. Review the cover alongside the Cambridge treatment specification and the agreed boundaries around sensitive equipment or operating areas.

06Nearby areas

Also covered from the Bedford depot.

A research or commercial building outside Cambridge? HOLVEM's coverage supports surrounding premises with their own operating requirements.

Start a project brief All areas we cover

The next step

Your Cambridge building.
Your brief.
A specialist.

If you already know the thickness or U-value you need, we price to it and confirm it is right for the building; if not, we work it out with you. A brief takes about five minutes and photographs are welcome. "Not sure" is a useful starting point.

Start a project brief Send photographs

Or call 01932 506658. Enquiries received before 3pm on a working day are contacted the same day; after 3pm, the next working day. A commitment to contact, not a quotation, a survey or a price.

WarrantyA 25-year HOLVEM workmanship warranty, plus the manufacturer's 25-year product warranty, issued directly to the client by the manufacturer. The scope of each is set out in its written terms.

HOLVEM is an accredited installer for the manufacturer of the spray foam systems we apply.

Start a project brief 01932 506658